Resources
Learning Centre
Technical resources, troubleshooting guides, and expert insights to help you get the most from your adhesive systems.
Showing 62 articles
PPWR and Your Adhesive: What FMCG and Food Producers Actually Need to Know
Straight answers on PFAS limits, recyclability grades, oxo-bio additives and deadlines, with an interactive PPWR compliance checklist and a branded PDF download.
Charring In The Tank Is Not A Maintenance Problem
A condiments packer's tank was charring and blocking nozzles. We swapped to a cleaner running grade at the same temperatures and cut adhesive consumption by 31.8%, weighed on their own line.
The Paper Tore Before the Glue Did
A book bindery dropped its adhesive tank 30 to 45 degrees to validate a new grade, and the bond still outlasted the paper.
One Visit Was Enough
A desserts cartoning line dropped its tank 45°C and used 31% less adhesive, on the very first day.
Nobody Had Cleared That Drain Valve In Years
A drinks packer's tank drain valve was blocked solid with char nobody had noticed. We swapped adhesives on their glossiest, hardest to bond board and cut consumption by 14%.
Nobody Had The Password To Their Own Tank
A bottling line's hot melt tank was locked at a high temperature nobody could change. Once we got in, dropping it cut adhesive use by 48%.
170 Degrees Was The Real Problem
Overspray, charring and blocked nozzles on a spice cartons line all traced back to one thing: temperature. Adhesive use fell by more than half once it came down.
Nobody Asked Why The Tank Ran That Hot
A frozen chip packer's hot melt tank had run at 165 degrees C for years, no one could say why. Bringing it down 67 degrees cut adhesive use by a fifth.
Some Adhesives Only Fail When It's Warm
A tissue packer's pop-opens only showed up once the weather warmed up. We trialled two grades honestly on their line, and only one of them actually fixed it.
Uneven Glue Beads Are Not Fine
A bigger bead on one flap than the other usually means a part-blocked nozzle, not a design quirk. Here's how a pet food packer fixed it and cut adhesive use by 23.7%.
A wholesale distributor weighed the glue on their trays before and after switching adhesive. Up to 48% less adhesive for a stronger bond.
Char in the Tank Is Not Normal
Black flecks in a hot melt tank are usually a sign of running too hot for too long. Here's what happened when a fresh produce packer tried running 70 degrees cooler.
A major dairy cured pop-opens in a single morning trial on their own line, and picked up a 6% consumption saving along the way.
A commercial bakery had 'always' had stringing. One trial killed it and cut glue use by around 38%. What actually causes stringing.
Field report from a national recipe box packer: 66% less adhesive energy, 31% less glue, and blocked nozzles gone after a one-day trial.
The True Cost of Hot Melt Adhesive — The Iceberg Model
The price per kilo is just the tip of the iceberg. See the downtime, waste and hidden costs that drive the true cost of hot melt adhesive — and how to measure them on your own line.
UltimateCool® EC98 for Brewery and Distillery Packing Lines
The 98°C low-temperature running of UltimateCool® 98 at a lower cost per kilo, built for case sealing, trays and multipacks in brewery and distillery packing halls.
Fastlock® 120 on Fawema Bag Packing Machines
Fawema bag packers do not need a 160°C adhesive. Fastlock® 120 closes the same bags from 120°C, cuts glue system energy by 41% and stops the char that blocks nozzles.
A technical guide to pastilles and prills — the two cooling processes used to form hot melt adhesive beads, and what (if anything) the shape tells you about the product inside.
Why oxo-biodegradable additives are effectively banned across the EU — and why some hot melts marketed as "biodegradable" may not be what they seem.
How to Reduce Plastic Pallet Wrap by 70% with Pallet Stabilisation Adhesive
Cut stretch wrap by up to 70% with CleanPeel® pallet stabilisation adhesive. Compare paper, plastic and cardboard loads on cost, waste and CO₂ — and meet the new low-temperature CleanPeel® grade.
Why Is UV Resistance So Important with Insect Traps?
Discover why UV resistance is the single most important factor in sticky insect trap adhesive performance — and see the test data that proves most adhesives fail within 24 hours.
Reduce Factory Downtime and Improve Health and Safety
Discover how Alphabond's hot melt adhesive starter kit helps factories optimise their production lines for maximum efficiency and safety.
The Evolution of Hot Melt Adhesives: Revolutionising Manufacturing
From early challenges to cutting-edge innovations like SafeMelt® (Generation 7) — discover how hot melt adhesives have transformed manufacturing through seven generations of technology.
Learn how to identify and resolve common processing issues when working with hot melt adhesives, from temperature inconsistencies to flow problems.
Discover the root causes of bond failures in hot melt applications and practical solutions to ensure reliable, consistent adhesion.
Hot Melt Troubleshooting: Stringing
Stringing causing line stoppages? This guide covers the causes and solutions for eliminating adhesive stringing on your production line.
Address adhesive fuming and charring issues with our comprehensive guide to temperature management and tank maintenance.
From inconsistent bead patterns to poor coverage, learn how to diagnose and fix common application issues in hot melt systems.
Three Practical Ways to Reduce CO₂ Emissions When Using Hot Melt Adhesives
Sustainability meets productivity. Discover three actionable strategies to reduce your carbon footprint while improving adhesive efficiency.
How You Can Save 70% in Energy Usage by Switching to the Latest Hot Melt Technology
Explore the energy-saving potential of modern hot melt formulations and equipment upgrades that can dramatically cut your operating costs.
7 Hacks for the Factory Engineer for Cutting Downtime When Using Packaging Hot Melts
Practical tips from the factory floor to minimise downtime, reduce maintenance, and keep your packaging lines running smoothly.
Finding the Sweet Spot: How to Optimise Coat Weight in Hot Melt Carton Sealing
Learn how to achieve the perfect balance between adhesive usage and bond strength for optimal carton sealing performance.
Discover this critical property that determines how hot melt adhesives perform under elevated temperatures — essential for heat-demanding applications.
Correlation Between Application Temperature and Thermal Degradation in Hot Melt Adhesives
Understanding how temperature affects adhesive performance and longevity, with guidelines for optimal operating parameters.
Correlation Between Nozzle Size and Consumption of Hot Melt Adhesives
A technical deep-dive into how nozzle selection impacts adhesive consumption, coverage, and overall line efficiency.
Temperature is critical. Learn how to determine the optimal running temperature for different adhesive types and applications.
Understand the chemistry behind hot melt adhesives — polymers, tackifiers, waxes, and additives that determine performance.
Critical timing information for production planning — from open time to full cure and everything in between.
How Much Glue Is Left in Your Nordson Tank? Our Technical Wizards Worked It Out
A handy reference guide to estimate remaining adhesive volume in your tank based on visual level indicators.
Whitepaper: Latest Developments in Hot Melt Adhesives – From Gen 1 to Gen 7
A comprehensive overview of hot melt adhesive evolution, from traditional EVA formulations to the latest metallocene technology.
Buyers Guide: Getting the Best Value Hot Melt Adhesive for Packaging Lines
Essential purchasing criteria for procurement managers — how to evaluate adhesive performance beyond just price per kilo.
How visual management techniques can transform your adhesive operations, reduce waste, and improve quality control.
Prevent unsightly mould issues on beverage labels with proper adhesive selection and application best practices.
Summer challenges? Learn how to prevent carton pop-opens during warm weather with the right adhesive and application adjustments.
Adhesive Solutions to Label Papers Winging
Tackle label winging issues with targeted adhesive solutions that keep labels flat and professional-looking.
A step-by-step guide to running a successful hot melt adhesive trial yourself — from draining the tank to optimising your visual factory.
7 Cues to Reduce Your Factory Production Line Downtime!
Practical cues to cut downtime caused by hot melt adhesives — from temperature control and filter changes to visual control points.
How Energy Efficient Hot Melt Adhesives Can Help You Hit Climate Goals
Test data showing how switching to lower temperature adhesives can reduce energy consumption by up to 70% and cut CO₂ output.
The Top 6 Hot Melt Tank Manufacturers in the UK and Ireland
A handy shortlist of the main hot melt equipment suppliers in the UK and Ireland, with links to their sites and areas of expertise.
The Top 5 Ways to Stop Boxes Popping Open During Hot Summer Months
Five practical solutions to prevent carton pop-opens when temperatures rise — from faster setting adhesives to nozzle adjustments.
Why Are Boxes Popping Open After Leaving My Factory Production Line?
The surprising reason your boxes pop open in summer — and why it's not the operator, the glue batch, or the machine settings.
Maximising Performance: The Impact of Temperature on Hot Melt Adhesive
Test results showing how running adhesives at lower temperatures dramatically reduces degradation, charring and blocked nozzles.
Uncover the pricing trick where adhesive is sold per litre instead of per kg — and how a £3.80/litre price is actually £6.28/kg.
SafeMelt®: Patented Generation 7 Colour-Changing Hot Melt for the Visual Factory
How SafeMelt®'s patented Generation 7 technology — the world's first colour-changing hot melt — runs over 60°C cooler with 54% energy savings.
How switching from a 0.4mm to a 0.3mm nozzle can save a typical food factory £74,750 per year in adhesive costs.
Adhesive That Cuts Energy Costs AND Reduces Carbon Footprint
Real trial results showing a switch from 165°C to 105°C saved 11,424 kWh per year and cut CO₂ by over 50%.
An independent guide to the main hot melt adhesive suppliers in the UK and Ireland — with links and key details for each.
An overview of PSA characteristics, formulations, advantages and testing methods for this multi-billion dollar adhesive family.
A common-sense guide to preventing blocked nozzles — covering temperature, formulation, foreign bodies, maintenance and adhesive technology.
Whitepaper: What is Stringing and Tailing and How Can It Be Eliminated?
This whitepaper examines the 3 phases of bonding and the eight causes of stringing, with practical remedies for each.
The Science Behind Sticky Pest Trap Adhesives and Pastes
Discover the technical balancing act behind pest trap adhesive formulation — from tack levels to UV stability and rheology.
Stay Updated
Get the latest technical insights, troubleshooting tips, and industry news delivered to your inbox.
Can't Find What You're Looking For?
Our technical team is ready to help with any adhesive challenge you're facing. Get personalised advice and solutions tailored to your specific application.
Troubleshooting
Temperature Guides
Packaging Tips
Labelling Advice
