Alphabond Field Report

    One Visit Was Enough

    Most adhesive changeovers come with a waiting game. Run it for a week, check the pallets, run it for a month, then decide. This one didn't need any of that.

    A desserts packer's high-speed cartoning line, some of it destined for the freezer, called us in to set up a cooler running grade. The tank had been sitting at 155°C across the board, tank, hoses, nozzles, for as long as anyone could remember. Nobody had asked why.

    • Field Report
    • Food Manufacturing
    • Desserts
    • Condiments
    • Cartoning
    • Nordson
    • Consumption Saving
    • Energy Saving

    What we found

    Before we touched anything, we weighed the adhesive going onto three cartons with the incumbent grade: 0.45 grams. Fibre tear was poor, the bond was there but only just, the kind of good enough that nobody questions until someone weighs it.

    What we changed

    High-speed dessert cartoning line running during the trialIncumbent adhesive drained out of the tank before the changeoverColour drop in the tank confirming Perfecta UltimateCool 98 Plus had purged throughScales showing 0.45 grams of adhesive from three cartons with the incumbent gradeScales showing 0.31 grams of adhesive from three cartons with Perfecta UltimateCool 98 Plus

    We drained the tank, refilled with Perfecta UltimateCool 98 Plus, and dropped the temperatures right down: tank to 110°C, hoses to 115°C, nozzles to 120°C. That's 45°C cooler at the tank than where it started. Production kept running throughout.

    Once the new adhesive had worked its way through the hoses and guns, a colour drop made the changeover visible, we started pulling cartons off the line to check.

    What it did

    Every carton came off with full fibre tear, the board itself gave way before the bond did. That's the benchmark we look for. Then we weighed it: 0.31 grams for three cartons, down from 0.45 grams. That's 31% less adhesive, at a tank running 45°C cooler, from a single morning's visit.

    Lower temperatures also mean less energy spent heating the tank, less risk of char building up over time, and a safer tank to work around. All from the same visit that cut the glue bill.

    The bit that says the most

    The team didn't wait for extended data before deciding what to do next. Line 1 was left running on the new settings, and the plan is already in motion to roll the same changeover out to the rest of the lines using the exact same procedure. When a fix is this visible on the scales, you don't need a second opinion.

    Caveat, for the record

    This is one line, one visit, one day's data. We'd always recommend an extended pallet run to confirm figures over time, and that's exactly what's happening here as the other lines get switched over. We'll be honest if anything changes.

    Is your tank running hotter than it needs to, and nobody's ever asked why? That's usually where the easiest wins are hiding.

    Small print: Figures from a genuine Alphabond trial, weighed on the customer's own line and scales. Customer details withheld at our discretion.

    Want the same numbers for your line?

    One day on your line, with your product and your team watching. We bring the kit, do the maths and leave you the report either way.

    Book a free trial on your line