If you have spent any time trying to get a straight answer on PPWR, you will know the problem. Search it and you get forty summaries, half written for lawyers, half written by someone who skimmed a press release. Ask five suppliers what it means for your packaging and you will get five different levels of confidence, most of it unearned, because a fair chunk of PPWR genuinely is not finalised yet.
So here is our attempt at doing this properly. We are an adhesive manufacturer, not a law firm, so nothing here is legal advice. If you need a formal compliance position, get proper counsel involved. But adhesive is our world, and we get asked about PPWR most weeks now, so we have pulled together the answers to the questions we are actually hearing, including the ones a lot of content out there avoids.
What PPWR is, in one paragraph
The Packaging and Packaging Waste Regulation, Regulation (EU) 2025/40, is the EU's new law covering the entire lifecycle of packaging, regardless of material: what it is made of, how recyclable it is, and what happens to it at end of life. It replaces the old Packaging Directive with one directly applicable law across the EU, and it entered into force in February 2025. The first wave of obligations, mostly substance restrictions and the Declaration of Conformity, came into force on 12 August 2026, so that part is live now. The rest phases in through to 2040. One nuance worth holding on to: the general obligation that packaging be recyclable applies from 12 August 2026, assessed against the existing criteria and EN 13430. What starts in 2030 is the graded design-for-recycling regime.
The bit most summaries skip
Several important areas, recyclability criteria in particular, are still waiting on secondary legislation (delegated acts) that has not been finalised. That is not us being vague. Anyone telling you the recyclability rules are locked down right now is getting ahead of the facts.
Does PPWR apply to companies using adhesive?
Only indirectly, and only if you are placing packaging, or packaged goods, on the EU market. If you are a UK business selling packaged goods into the EU, you need to comply. If you are UK-only with no EU customers, PPWR does not reach you. Northern Ireland has its own guidance route via DAERA, worth checking separately if that applies to you. Start with DAERA's packaging and packaging waste guidance rather than assuming the GB position carries over. One point that decides who carries the load: under PPWR, manufacturer status follows the brand, not necessarily the filling line.
Who owns which obligation
Your adhesive supplier
"Supplier" under Article 16
- Provides restricted-substance statements
- Supplies recyclability-relevant data
- Supplies compostability data where relevant
- Does not sign your Declaration of Conformity. But under Article 16, must provide the information you need to draw it up — a legal obligation, not a courtesy
You, the brand owner or filler
"Manufacturer" under PPWR
- Draws up and holds the Declaration of Conformity — five years for single-use packaging, ten years for reusable
- Meets substance restrictions across the finished pack
- Owns recyclability, recycled content and labelling as they phase in
Is an adhesive considered a plastic under PPWR?
No. PPWR's definition of "plastic" is about the material forming the main structural component of the packaging. Adhesive does not do that job, so it is not treated as plastic and is not subject to plastic recycled-content targets.
There is a second point buried in the definitions that most summaries miss. Adhesive applied directly onto a product surface, where it cannot be separated from the product, is not classed as packaging at all — though a sticky label applied to produce is packaging, and the adhesive holding it there goes with it. And where adhesive genuinely is part of a packaging unit, it is explicitly excluded from the composite packaging classification alongside labels, inks, varnishes, paints and lacquers, regardless of its share of pack mass. A separate 5% threshold applies to other minor material components, not to adhesive.
Adhesive as a share of pack mass
A typical case-sealed corrugated shipper. Adhesive is excluded from composite classification by category rather than by weight, but the scale is worth seeing: even in adhesive-heavy constructions such as labelled packs or laminated cartons, adhesive stays well within single figures.
Indicative figures based on typical case sealing coat weights, not a formal declaration.
What are my obligations as a food producer?
If you place packaged product on the EU market, the compliance load sits with you. From 12 August 2026 that means the substance restrictions, identification requirements, and the Declaration of Conformity. On identification, Article 15 requires each packaging unit to carry a type, batch or serial number — or that information in an accompanying document where the pack's size or nature does not allow it — together with your name or trademark and postal address. On the Declaration, it is not simply a document you file: it follows a conformity assessment under Module A, internal production control, where you actively assess your packaging against the applicable requirements before you sign it. As requirements phase in through 2028 to 2030, that list grows to cover recyclability, recycled content and labelling.
Your suppliers, including us, must give you the information you need to support that Declaration. What we are not required to do, and what you should not ask any supplier to do, is sign or draw up the Declaration itself. You do not have to hand it to every customer who asks, and you are entitled to expect the same discretion from us around our formulations.
One thing worth being clear about, because it catches people out: what you are building here is your own internal audit documentation. There is no central EU database to upload it to, no portal to register on, and no official template to fill in the way there is for a REACH registration or a food-contact Declaration of Compliance. You write it, you hold it, and you produce it if an enforcement authority asks — within ten days of a reasoned request. The content has to follow the model structure set out in Annex VIII, and the evidence behind it has to be real and traceable back to supplier data. It is not a public document, but you must be able to produce it on request to an enforcement authority, and any importers of your packaged product in the supply chain are required to hold a copy.
What are PFAS, in plain English?
PFAS stands for per- and polyfluoroalkyl substances. They are a family of thousands of man-made chemicals built around very strong carbon-fluorine bonds, which is what makes them so useful and so awkward. That bond is what gives non-stick pans their slip, outdoor coats their water resistance, and some paper packaging its grease barrier.
The problem is the same bond. It barely breaks down in the environment or in the body, which is where the "forever chemicals" nickname comes from, and some PFAS have been linked to health concerns at very low concentrations. That is why the limits in PPWR are set in parts per billion rather than percentages. Because the family is so large, the regulation sets three separate limits: one for any single targeted PFAS substance, one for the sum of targeted substances, and one for total PFAS including polymeric forms.
For adhesive specifically, PFAS is not a functional ingredient in standard hot melt chemistry. There is no performance reason to put it there. The realistic risk is trace carryover from elsewhere in the packaging, most often a grease-resistant paper or board coating, which is exactly why the limits are written against the finished pack rather than each component.
Do I need to lab test that the adhesive is free of PFAS?
Usually not, and that is not us dodging the question. First, the limits are written against the finished packaging placed on the market, not against the adhesive as a standalone material, so testing the adhesive on its own does not answer the question the regulation is actually asking. Second, there is currently no harmonised EU testing methodology for PFAS in food-contact packaging, though the Commission published guidance in June 2026 recommending a tiered approach that starts with a total fluorine screen. A harmonised method is expected, but it is not finished.
Would testing ever be needed? Yes. Where the adhesive is in direct food contact, rather than sealing the outside of a carton or case, testing the construction is a reasonable step, and we would expect that conversation. The wording sits in Article 5 of Regulation (EU) 2025/40 if you want to read the source rather than a summary of it.
What you should have is documentation. Ask your adhesive supplier whether PFAS is intentionally added to the formulation, and get it in writing. We can issue that statement for any of our products; it is a standard request. Supplier statements cover the adhesive. For the finished pack, the Commission's June 2026 guidance recommends starting with a total fluorine screen — a result below 50 ppm may generally be treated as compliant, though the guidance still describes further steps and it is guidance, not a harmonised method. When enforcement does start, expect a stepwise approach: total fluorine screening first, targeted testing only where that flags something.
It is worth keeping PFAS and heavy metals apart, because they do not work the same way. PFAS is assessed at the level of the finished food-contact pack. A written statement that the adhesive is PFAS-free is one input, but it does not answer the question on its own. Heavy metals are assessed at the level of packaging or packaging components, which means the limit applies to the adhesive itself, not only to the pack it ends up in. That is why our statement carries more direct weight for heavy metals than it does for PFAS, and why you can reasonably ask us for adhesive-level test data on heavy metals specifically.
PFAS limits from 12 August 2026
Assessed at the level of the finished food-contact packaging, not the adhesive in isolation, with total fluorine used as the analytical method for the total-PFAS figure. Applies to EU market placement.
| Measure | Limit |
|---|---|
| Any single targeted PFAS substance | 25 ppb |
| Sum of targeted PFAS substances | 250 ppb |
| Total PFAS, incl. polymeric PFAS (measured via total fluorine) | 50 ppm |
Heavy metal limits from 12 August 2026
Assessed at the level of packaging or packaging components, which is different from PFAS. This carries forward from the old Packaging Directive 94/62/EC, so most established suppliers should already have it covered.
| Measure | Limit |
|---|---|
| Lead, cadmium, mercury and hexavalent chromium combined* | 100 mg/kg |
*Applies to all packaging, including at the level of individual components such as the adhesive, not only to food-contact packaging as a whole.
Note that the limits cover PFAS whether intentionally added or present as background trace, so "we did not add it" is not automatically the end of the conversation, though it is the right starting point. This is the NIAS problem in miniature: non-intentionally added substances, things nobody put in on purpose that arrive as impurities, carryover from a recycled fibre stream, or migration from an adjacent layer. A supplier statement covers intent. It cannot, on its own, cover everything that ends up in the pack.
Enforcement will not look like a certificate check on every product line. Expect market surveillance by random selection: an authority pulls packs off the shelf, runs a total fluorine screen first as a cheap yes-or-no gate, and only goes to organic fluorine and then targeted substance-by-substance testing where that screen flags something. Which is why your documentation matters more than a test result you commissioned yourself — and why it needs to cover every product line, not just the ones you chose to test. If a random sample flags, you need to be able to show where every component came from and what each supplier declared.
A question worth asking your supplier
If anyone offers you a firm PFAS-free guarantee backed by a test, ask which method they used. Overpromising against a standard that does not exist yet is a liability somebody is going to own later.
Does an adhesive have to be recyclable in the EU?
To be clear on scope before anything else: this section is EU market only. Not tested on its own, in most cases. Adhesive is expected to be assessed as a small constituent of the whole packaging unit, against design-for-recycling guideline tables under CEN standards. The first EN 18120 standards for plastic packaging published in 2026, covering principles and terminology, sortability evaluation, and material-specific parts for PET, PE and PP rigids and flexibles, PS and EPS. Other materials are still to follow. Two routes to compliance are shaping up: your adhesive type is already listed as compatible in the published guideline, or practical testing shows it is compatible where it is not listed. Where an adhesive type turns out to be incompatible, reformulation or a change of adhesive would be needed ahead of the recyclability enforcement date.
There is useful evidence already. CEFLEX testing has shown that because adhesive layers are so thin, they generally do not interfere with near-infrared sorting, the main automated sorting method across EU recycling.
Three things that upset automated sorting. None of them are typical ingredients in hot melt adhesive, so this is not a list of problems you probably have. It is worth knowing anyway, because these materials do turn up in inks, coatings and specialist adhesives, and because it is a sensible question to put to any supplier pitching you something unusual.
Carbon black
Absorbs NIR light, so packs can go unsorted.
Ferromagnetic materials
Pulled out by magnetic separation.
Conductive materials
Misread by eddy-current sorting.
Those three are the ones worth actively avoiding in adhesive used across large or full pack surfaces. If you need reassurance, we can issue statements confirming their absence, and NIR-sortability testing is available on request. This requirement does not bite until 2030, or 24 months after the relevant delegated act, so there is time. It is still the one worth watching most closely over the next couple of years.
Recyclability will be graded in the EU market, not just passed or failed
From 2030 packaging gets a design-for-recycling performance grade based on how much of the unit is recyclable by weight, for packaging placed on the EU market. Grade A and B units stay comfortably on the market. Below the 70% line, packaging is classed as not recyclable and cannot be placed on the EU market at all. Adhesive choice will rarely decide that grade on its own, but it can be the thing that drags a borderline pack under the line.
95% or more recyclable
Comfortably compliant.
80% or more recyclable
Compliant, with room to improve.
70% or more recyclable
Compliant from 2030, phased out from 2038.
Classed as not recyclable
Cannot be placed on the EU market from 2030.
Thresholds as set out in Annex II of Regulation (EU) 2025/40. Annex II also names glues among the design features assessed for recyclability, alongside additives, labels and sleeves.
The sequencing matters more than the grades themselves. Recyclability criteria and performance grades for all packaging materials are due by January 2028. The methodology for calculating recycled content follows in 2029. Recyclability is then enforced from 2030. So the design decisions land two years before the deadline, which is why the honest answer to "what do we change now" is usually "nothing expensive yet, but get your data in order". From 2038 Grade C is removed as well, leaving only Grades A and B on the EU market. That gives an eight-year window to move from the 70% floor up to 80%.
What about the UK?
PPWR is EU law. If you are UK-only with no EU sales, none of the dates above are a legal requirement for you. UK packaging policy is moving separately, through Extended Producer Responsibility, the plastic packaging tax and the recyclability assessment methodology, and the direction of travel is broadly similar without the detail lining up.
For the UK food and drink view specifically, the Food and Drink Federation publishes genuinely useful guidance for members and is the better reference than reading EU text and guessing how it will be mirrored here. If you sell into both markets, run them as two workstreams. Assuming one covers the other is how you end up compliant in neither.
How does an oxo-bio additive affect PPWR compliance?
It is easy to hear "oxo-biodegradable" and assume it helps your sustainability position. It does not, and it can actively work against you. Oxo-degradable plastic is conventional plastic with a pro-oxidant additive that makes it fragment faster. It does not fully biodegrade; it breaks up into microplastics more quickly.
That has been banned across the EU since 2021 under the Single-Use Plastics Directive, and the ban was upheld by the EU General Court in January 2024 against a legal challenge. PPWR builds on that existing prohibition rather than needing its own clause. If you are not sure whether your current adhesive contains an oxo-degradable additive, ask your supplier directly — it is a straightforward question with a yes-or-no answer. Even setting the ban aside, fragmentable plastic is the opposite of what PPWR's recyclability and compostability logic is trying to achieve.
Oxo-bio
Banned
- Fragments into microplastics
- No recognised standard behind it
- Contaminates recycling streams
Genuinely compostable
EN 13432
- Whole construction certified together
- Facestock, adhesive and ink all clear the bar
- Standard currently being revised
Genuinely recyclable
EN 18120
- Assessed inside design-for-recycling criteria
- Adhesive judged as a pack constituent
- Guideline tables still in progress
So if a component, adhesive or otherwise, is pitched to you as "oxo-bio" and sold as a PPWR compliance win, ask the direct question back: what standard is it certified against? A compostable label needs the facestock, adhesive and ink to clear EN 13432 together. A biodegradable facestock with a synthetic adhesive underneath is not a compostable label.
We have written this up at more length in our post on oxo-bio adhesives, because the claims are getting more confident, not less.
A claim worth checking, not taking on trust
You'll see hot melts marketed as "biodegradable" and "PPWR ready" where the breakdown is described as starting with UV light, oxygen and heat acting on the polymer chain. That's worth knowing, because it's the same mechanism the EU's ban on oxo-degradable plastic was written to catch — additive-driven oxidative fragmentation, not straightforward microbial digestion. That doesn't automatically make any given product the banned material — but it does mean the burden of proof sits with whoever is making the claim: a genuine EN 13432 certification is a real, independently tested standard, and if a product holds one, that counts for something. The certificate is what to check, not the word on the tin.
So before a biodegradable claim gets treated as a PPWR compliance win, ask three things. What actually triggers the breakdown — additive-driven oxidation, or microbial biodegradation? Can they show you the underlying EN 13432 test report, not just a pass/fail summary? And has "no microplastics" been independently tested, or is that a claim about intent rather than a measured outcome? Paperwork on all three, you've got a real certification. A brochure, and you have your answer.
What are the deadlines?
PPWR is not a single date, it is a sequence. Treat 2026 as real and immovable, and everything from 2028 onward as directionally correct but still capable of shifting as the delegated acts get finalised.
- 12 Aug 2026Date fixed
Substance limits + Declaration of Conformity
PFAS limits (25 ppb single substance, 250 ppb sum, 50 ppm total fluorine) and a combined 100 mg/kg limit for lead, cadmium, mercury and hexavalent chromium. Your Declaration of Conformity obligation starts here.
- 12 Feb 2027Date fixed
Reusable packaging criteria
Implementing act on reuse due, with phased requirements following it.
- By Jan 2028Still moving
Recyclability criteria and performance grades
Criteria and design-for-recycling performance grades published for all packaging materials. This is where you find out how your packs grade, two years before enforcement.
- 12 Feb 2028Date fixed
Compostability for specific formats
Adhesive labels on fruit and vegetables must be industrially compostable.
- From 12 Aug 2028Date fixed
Packaging labelling
Harmonised material-composition sorting labels under Article 12, phasing in from 2028 or 24 months after the implementing acts, whichever is later. An obligation in its own right, not a footnote to compostability: artwork, pack redesign and print lead times mean the decisions land well before the deadline.
- 2029Still moving
Recycled-content calculation methodology
Methodology for calculating recycled content is set, ahead of the 2030 targets.
- From 2030Still moving
Recyclability enforced
The big one for adhesive. Applies from 2030, or 24 months after the relevant delegated act if that lands later. Packaging below 70% recyclable cannot be placed on the market. Recycled-content targets and packaging minimisation rules arrive alongside it.
- 2035Still moving
Recycled at scale
Packaging must be recycled at volume through EU infrastructure, not just theoretically recyclable.
- 2038Still moving
Grade C recyclability phased out
Only Grades A and B, at 80% or more recyclable, permitted on the EU market.
- 2035 - 2040Still moving
Single-use restrictions
The longer-tail single-use packaging phase-outs run through to 2040.
Do not over-commit early
Do not lock in expensive reformulation decisions this year chasing a 2030 requirement that has not been fully specified. That is premature commitment, not compliance.
The PPWR checklist for FMCG and food producers
Tick these off as you work through them. Nothing is stored or sent anywhere. The recyclability and grading items apply to packaging placed on the EU market.
0 of 13 complete

Being straight with you
A few things we are not going to pretend to know. The recyclability delegated acts are not finalised, so anything written about 2030 requirements, this article included, is our best current reading and not a guarantee of the final text. There is no harmonised PFAS test method yet, so "PFAS-free" claims from anyone right now deserve a follow-up question about methodology. And PPWR is EU legislation. If you are UK-only with no EU sales, none of this is a legal requirement for you yet. UK policy is running on its own track, and the Food and Drink Federation is the better reference for that side.
Get your free PPWR adhesive guide
A branded PDF of the full guide, including the PFAS limits, the recyclability grades, the deadline table and the checklist. Tell us where to send it and the download starts straight away.
This article was written on and updated on , reflecting the regulation as it stood then. The delegated acts are still being drafted, so parts of it will date. Ask us to keep you updated and we will email you when it changes.

