Back to Learning Centre
    Troubleshooting

    Hot Melt Troubleshooting: Stringing

    Stringing causing line stoppages? This guide covers the causes and solutions for eliminating adhesive stringing on your production line.

    Nov 14, 20255 min read

    If you've ever opened a packing line to find fine, sticky threads of adhesive stretching between the nozzle, substrate, and anything else unlucky enough to be nearby, you already know the frustration of stringing.

    Also known as cobwebbing or angel hair, stringing is one of the most persistent and messy issues that can affect a hot melt system — and it rarely stays contained.

    What Stringing Causes

    Fine, sticky threads stretching between nozzle and substrate
    Adhesive clinging to rollers and sensors
    Contamination of packs and guides
    Sensor misreads and blockages
    Unnecessary line stoppages
    Operator frustration and cleaning time

    Why Stringing Is So Challenging

    What makes stringing particularly challenging is that it isn't caused by a single fault. It can be triggered by a range of factors and pinning down the root cause can be frustrating.

    Even small mistakes can create long adhesive tails, glue mist, or cobwebs that compromise pack appearance and gum up the works. And once it starts, it usually gets worse fast — leading to cleaning time, rejected packs, and preventable downtime.

    The Solution: Our Stringing Hints & Tips Sheet

    To help engineers and operators get ahead of the problem, we've created a dedicated Hints & Tips Sheet that breaks down the most common causes of stringing and the practical steps you can take to reduce or eliminate it.

    What the Guide Covers

    Common causes of stringing and cobwebbing
    Set-up tweaks that reduce adhesive tails
    Environmental control best practices
    How to identify when the adhesive itself is the culprit
    Step-by-step diagnostic process
    Preventative maintenance tips

    Download the Stringing Hints & Tips Sheet

    Use the form to get your free copy and start diagnosing the root cause of stringing on your line.

    If the issue is persistent or you suspect the adhesive choice may be part of the problem, our experts also offer a free Discovery Session to review your set-up and recommend the right long-term solution.

    Download Free Guide

    Eliminate cobwebbing and adhesive threads

    Preview of Hot Melt Troubleshooting: Stringing Hints & Tips Sheet

    To get your FREE copy of this hints & tips sheet, simply fill in the details below and we'll send you the complete document straight to your inbox.

    Share this article

    Need Expert Help?

    Our technical team can diagnose your specific issues on-site.

    Book a Discovery Session