About Fastlock® 836J
Fastlock® 836J is a water based adhesive for packaging & case sealing used across food & beverage, breweries & distilleries industries. It delivers excellent jetting performance for high speed carton and case manufacture and performs well on difficult substrates. Request the technical data sheet below for full performance and storage information.
Key features
- Excellent jetting performance for high speed carton and case manufacture
- Performs well on difficult substrates
- 600–800cps and high solids
- Performs well through HHS jetting applicator heads

Technical attributes
- Type
- water based adhesive
- Packaging
- IBC
- Typically used on
- ValcoHHSBickersLamina
Applications
Industries
Mentioned across the site
Industry pages, articles and case studies where this product is referenced.
How our hot melt grades hold case and tray sealing through cold chains, transit and seasonal temperature swings.
Pressure-sensitive and water-based coatings used in tape, label and self-adhesive converting.
Hot melt adhesives for industrial assembly applications, including roofing membrane lamination, underlay and multi-layer construction panels.
Food-safe hot melt and water-based adhesives engineered for high-speed beverage and food lines.
High-performance hot melt adhesives for insulation board lamination, underlay and construction panel assembly.
How UV tracer and colour-change adhesives make bond placement and tank temperature visible on the line.
A drop-in replacement for the discontinued 781 grade with matched viscosity and set speed.
When water-based acrylics outperform hot melt — applications, chemistry and trade-offs.

Alphabond's flagship hot melt platform — a broad range of grades covering packaging, labelling, assembly and bookbinding.
Explore the Fastlock rangeRelated products
Other Fastlock grades and close family members.
Fastlock® 299
High Performance Packaging Adhesive
- Excellent bonds on corrugate and board
- Very high solids waterbased adhesive
- Suitable for wheel application for high speed carton converting
- High adhesion to difficult surfaces including coated and filmic
Fastlock® 120
Excellent case and carton sealing adhesive
- Runs 40°C cooler for 41% energy savings
- Works across all substrate types
- Good adhesion for case and carton sealing
- Supplied in granulated format for autofeeding
Fastlock® 30156
High Tack Water-Based Acrylic
- Very high solids (50%) — lower usage, same performance
- Superior clarity with excellent water whitening resistance
- APEO free formulation.
- High plasticiser resistance.
Request more information
Get the technical data sheet, safety data sheet and a sample for Fastlock® 836J. We'll get back to you within one working day.
Request Samples, MSDS & Technical Data Sheets
Select the products you're interested in and we'll send you the information you need.
People who looked at this also viewed
UltimateCool® EC98
Economy Low-Temperature Adhesive
- Application temperature: 98°C
- Cost-effective solution for standard packaging
- Over 54% energy savings vs traditional adhesives
- Generation 6 technology — runs from 98°C in the tank.
PerfectaMax® 40
High Speed non-tailing Hot Melt
- Very clean running with zero tailing at high speed
- FDA approved for food applications
- Excellent adhesion to plastic
- Good adhesion to wide range of more difficult substrates
UltimateCool® 100
Generation 6 low temperature adhesive
- High-performance hot melt adhesive for demanding applications
- Generation 6 technology - runs from 100°C in the tank
- Typically 52% lower in energy compared to traditional grades running at 160°C
- Fast setting for case and carton sealing applications
Alphabond Field Reports
From the field
Real trials on real production lines, measured on site.
Field Report
Pop-Opens: The Packaging Fault You Don't See Until It's on a Lorry
A major dairy cured pop-opens in a single morning trial on their own line, and picked up a 6% consumption saving along the way.
Field Report
How a Recipe Box Packer Cut Hot Melt Energy Use by Two Thirds
Field report from a national recipe box packer: 66% less adhesive energy, 31% less glue, and blocked nozzles gone after a one-day trial.
Field Report
Charring In The Tank Is Not A Maintenance Problem
A condiments packer's tank was charring and blocking nozzles. We swapped to a cleaner running grade at the same temperatures and cut adhesive consumption by 31.8%, weighed on their own line.
Need help choosing the right Fastlock grade?
Book a 30-minute consultation with one of our adhesive specialists. We'll look at your line, your substrates and your goals.
Book a Consultation
