Industries / Insulation & Construction
Hot Melt Adhesives for Insulation & Construction
Precision bonding with UV-traceable hot melts. Fastlock® 82 Plus UV fluoresces under UV light so you can verify adhesive placement — even in the low-light conditions found in manufacturing plants.
Insulation & Construction Adhesives
Adhesives formulated for the insulation and construction sector — filter by type or format to find the right solution.
Fastlock® 82 Plus
High Performance Hot Melt
- Low application temperature — applies from 100°C giving very low energy usage
- Prevents char and degradation to allow reduced spend on spare parts.
- Excellent performance on insulation roll applications.
Fastlock® 30029H
Specialist Hot Melt Adhesive
- Excellent adhesion to wide range of assembly applications
- Good adhesion for construction applications
- Autofeedable
- Good cold temperature resistance
Fastlock® 82 Plus UV
Low Temperature Assembly with UV Tracer
- Runs from just 100°C — saves 18,480 kWh of energy
- Built-in UV tracer for quality inspection
- Super aggressive bond strength, no spitting
- Allows for very low coat weights — typically 30–40% lower.
BirksteinOtler® 500ml Spray Can Hot Melt Cleaner 2
Spray-on Cleaner for Hot Melt
- D'limonene based
- Removes PSA hot melt residue from machine parts
Fastlock® 30146
High performance, high heat resistant production assembly hot melt
- Very high heat resistance, softening point around 125°C
- Supplied as a granule for manual charging
- Fiberised application down to 5 gsm coat weight
Fastlock® 30146AF
High performance, high heat resistant production assembly hot melt
- Very high heat resistance, softening point around 124°C
- Prilled to run through auto-feeder systems
- Fiberised application down to 5 gsm coat weight
Fastlock® Cleaner 2
Hot melt cleaning liquid
- Natural orange D'limonene based
- Removes residue hot melt including PSA adhesive
- Natural orange D'limonene based cleaner.
- Removes residue hot melt including PSA adhesive.
- Easy to apply.
Fastlock® Cleaner 3X
Hot Melt Cleaning Granules
- Cleaning granules for flushing out hot melt systems
Showing 8 of 8 products • View all products
Why Insulation Manufacturers Choose Fastlock® 82 Plus UV
A pressure-sensitive hot melt specifically developed for production assembly — with UV traceability that takes the guesswork out of adhesive placement.
UV Fluorescence
Fastlock® 82 Plus UV fluoresces under UV light, giving you improved visibility of adhesive placement on the production line — even in low-light conditions.
Pressure-Sensitive Hot Melt
Specifically developed for production assembly applications, delivering reliable bonds on insulation rolls and construction materials.
High Initial Tack
Very versatile with high initial tack and excellent adhesion to a wide range of materials — from foil facings to fibrous substrates.
Very Low Viscosity
Can be used in jetting applications for clean running on faster machines at a much lower application temperature than standard grades.
Lower Application Temperature
Reduced operating temperatures mean less energy consumption and improved operator safety on the production line.
High Peel Strength
Exceptional peel strengths allow for economical usage — you use less adhesive while maintaining a stronger, more reliable bond.

Fastlock® 82 Plus UV — See Exactly Where Your Adhesive Goes
In the low-light environments common in insulation manufacturing, verifying adhesive placement can be difficult. Fastlock® 82 Plus UV solves this — the adhesive fluoresces under UV light, giving operators instant visual confirmation of precise application.
Its very low viscosity makes it ideal for jetting applications, allowing clean running on faster machines at lower temperatures than standard grades. The result? Higher speeds, less waste, and bonds you can trust.
- Insulation roll bonding
- Mineral wool facing attachment
- Foil-to-foam lamination
- Building panel assembly
- PIR/PUR board facing
- Construction membrane bonding
UV Traceable
Visible under UV light
Low Viscosity
Ideal for jetting
High Tack
Aggressive initial bond
Lower Temps
Reduced energy usage
Ready to Improve Your Insulation Line?
Talk to our team about switching to a UV-traceable, low-viscosity hot melt that delivers high peel strength and precise placement — every time.
Request Samples, MSDS & Technical Data Sheets
Select the products you're interested in and we'll send you the information you need.





