About UltimateCool® 100
UltimateCool® 100 is a high-performance hot melt adhesive designed for packaging and case sealing in the food & beverage, brewery, and distillery sectors. Built on Generation 6 technology, it runs from as low as 100°C in the tank—typically delivering 52% lower energy use compared to traditional grades running at 160°C. Request the technical data sheet below for full performance and storage details.
Key features
- High-performance hot melt adhesive for demanding applications
- Generation 6 technology - runs from 100°C in the tank
- Typically 52% lower in energy compared to traditional grades running at 160°C
- Fast setting for case and carton sealing applications
- Excellent all-round adhesion
- Zero-char even after prolonged heating
- FDA approved

Technical attributes
- Type
- hot melt adhesive
- Packaging
- Bag
- Typically used on
- NordsonValcoMelerHHSPreoRobatechGracoITWLaminaB+/SealedairSMI case and tray sealersLantechCama GroupSomic PackagingBlueprint AutomationKliklok-WoodmanJacob White PackagingBosch/SyntegonSchubert GroupKrones AGFreemantleRovema GmbHBoixSmurfit KappaOystar A&F wraparoundIMA cartonerBradman Lake
Applications
Industries
Mentioned across the site
Industry pages, articles and case studies where this product is referenced.
How our hot melt grades hold case and tray sealing through cold chains, transit and seasonal temperature swings.
Food-safe hot melt and water-based adhesives engineered for high-speed beverage and food lines.
The science behind our adhesive generations — Gen 1 to Gen 7 — and why it matters on the line.
Why nozzles block, how char forms in tanks and which adhesives eliminate the problem at source.
Five practical fixes for case-seal failures when ambient temperatures climb above 30°C.
Why standard EVAs fail in summer and how UltimateCool® holds bonds through hot transit.
Practical checklist for cutting unplanned downtime caused by adhesive issues.
Deep-dive whitepaper covering chemistry, performance and ROI across all seven adhesive generations.
What manufacturers brought to stand A85 and how UK-formulated SafeMelt®, CleanPeel® 120 and BioMelt® 30151 answer those problems.

Generation 6 low-temperature adhesives running from 100°C — up to 52% energy savings versus traditional 160°C grades, with dramatically extended tank life.
Explore the UltimateCool rangeRelated products
Other UltimateCool grades and close family members.
UltimateCool® EC98
Economy Low-Temperature Adhesive
- Application temperature: 98°C
- Cost-effective solution for standard packaging
- Over 54% energy savings vs traditional adhesives
- Generation 6 technology — runs from 98°C in the tank.
UltimateCool® 98 Plus
Frozen Food Low-Temperature Adhesive
- Application temperature: 98°C with enhanced cold resistance
- Optimised for frozen food cartons and cases
- Over 54% energy savings
- Generation 6 low temperature technology.
UltimateCool® 98
Hot melt adhesive
- High-performance hot melt adhesive for demanding applications.
- Generation 6 technology — runs from 98°C in the tank.
- Typically 54% lower in energy compared to traditional grades running at 160°C.
- Fast setting for case and carton sealing applications.
Request more information
Get the technical data sheet, safety data sheet and a sample for UltimateCool® 100. We'll get back to you within one working day.
Request Samples, MSDS & Technical Data Sheets
Select the products you're interested in and we'll send you the information you need.
People who looked at this also viewed
Fastlock® 836J
High Speed Waterbased Packaging Adhesive
- Excellent jetting performance for high speed carton and case manufacture
- Performs well on difficult substrates
- 600–800cps and high solids
- Performs well through HHS jetting applicator heads
Fastlock® 299
High Performance Packaging Adhesive
- Excellent bonds on corrugate and board
- Very high solids waterbased adhesive
- Suitable for wheel application for high speed carton converting
- High adhesion to difficult surfaces including coated and filmic
PerfectaMax® 40
High Speed non-tailing Hot Melt
- Very clean running with zero tailing at high speed
- FDA approved for food applications
- Excellent adhesion to plastic
- Good adhesion to wide range of more difficult substrates
Alphabond Field Reports
From the field
Real trials on real production lines, measured on site.
Field Report
How a Recipe Box Packer Cut Hot Melt Energy Use by Two Thirds
Field report from a national recipe box packer: 66% less adhesive energy, 31% less glue, and blocked nozzles gone after a one-day trial.
Field Report
Nobody Asked Why The Tank Ran That Hot
A frozen chip packer's hot melt tank had run at 165 degrees C for years, no one could say why. Bringing it down 67 degrees cut adhesive use by a fifth.
Field Report
Char in the Tank Is Not Normal
Black flecks in a hot melt tank are usually a sign of running too hot for too long. Here's what happened when a fresh produce packer tried running 70 degrees cooler.
Need help choosing the right UltimateCool grade?
Book a 30-minute consultation with one of our adhesive specialists. We'll look at your line, your substrates and your goals.
Book a Consultation
