About Fastlock® 120
Fastlock® 120 is a hot melt adhesive for packaging & case sealing used across food & beverage, breweries & distilleries industries. It runs 40°C cooler for 41% energy savings, works across all substrate types and provides good adhesion for case and carton sealing. Request the technical data sheet below for full performance and storage information.
Key features
- Runs 40°C cooler for 41% energy savings
- Works across all substrate types
- Good adhesion for case and carton sealing
- Supplied in granulated format for autofeeding
- FDA approved for food applications

Technical attributes
- Type
- hot melt adhesive
- Packaging
- Bag
- Typically used on
- NordsonValcoMelerHHSPreoRobatechGracoITWLaminaB+/SealedairSMI case and tray sealersLantechCama GroupSomic PackagingBlueprint AutomationKliklok-WoodmanJacob White PackagingBosch/SyntegonSchubert GroupKrones AGFreemantleRovema GmbHBoixSmurfit KappaOystar A&F wraparoundIMA cartonerBradman Lake
Applications
Industries
Mentioned across the site
Industry pages, articles and case studies where this product is referenced.
How our hot melt grades hold case and tray sealing through cold chains, transit and seasonal temperature swings.
Slip-resistant pallet patterns that replace shrink wrap, reduce film consumption and protect goods in transit.
Pressure-sensitive and water-based coatings used in tape, label and self-adhesive converting.
Hot melt adhesives for industrial assembly applications, including roofing membrane lamination, underlay and multi-layer construction panels.
Food-safe hot melt and water-based adhesives engineered for high-speed beverage and food lines.
High-performance hot melt adhesives for insulation board lamination, underlay and construction panel assembly.
How UV tracer and colour-change adhesives make bond placement and tank temperature visible on the line.
Launch of CleanPeel® 120 — the next-generation pallet stabiliser with extended open time.
A drop-in replacement for the discontinued 781 grade with matched viscosity and set speed.
When water-based acrylics outperform hot melt — applications, chemistry and trade-offs.
What manufacturers brought to stand A85 and how UK-formulated SafeMelt®, CleanPeel® 120 and BioMelt® 30151 answer those problems.

Alphabond's flagship hot melt platform — a broad range of grades covering packaging, labelling, assembly and bookbinding.
Explore the Fastlock rangeRelated products
Other Fastlock grades and close family members.
Fastlock® 781
Low Surface Energy Specialist
- Outstanding adhesion on BOPP, PP, PET & metallised films
- Deep-freeze performance
- Neat, non-stringing application
- Excellent adhesion on BOPP sandwich packs.
Fastlock® 71P
General Purpose Hot Melt Stick
- Fast-setting with medium viscosity for versatile use
- Available as 12mm stick for glue gun application
- FDA approved — CFR 21.175.105
- Good general purpose packaging.
Fastlock® 66XE
High Performance Bio derived Assembly Adhesive
- Excellent adhesion to PP non-woven, corrugate, Frovi & PUR foam
- Long open time with high hot tack
- FDA approved — CFR 21.175.105
- Good adhesion to difficult materials
Request more information
Get the technical data sheet, safety data sheet and a sample for Fastlock® 120. We'll get back to you within one working day.
Request Samples, MSDS & Technical Data Sheets
Select the products you're interested in and we'll send you the information you need.
People who looked at this also viewed
UltimateCool® EC98
Economy Low-Temperature Adhesive
- Application temperature: 98°C
- Cost-effective solution for standard packaging
- Over 54% energy savings vs traditional adhesives
- Generation 6 technology — runs from 98°C in the tank.
PerfectaMax® 40
High Speed non-tailing Hot Melt
- Very clean running with zero tailing at high speed
- FDA approved for food applications
- Excellent adhesion to plastic
- Good adhesion to wide range of more difficult substrates
UltimateCool® 100
Generation 6 low temperature adhesive
- High-performance hot melt adhesive for demanding applications
- Generation 6 technology - runs from 100°C in the tank
- Typically 52% lower in energy compared to traditional grades running at 160°C
- Fast setting for case and carton sealing applications
Alphabond Field Reports
From the field
Real trials on real production lines, measured on site.
Field Report
Pop-Opens: The Packaging Fault You Don't See Until It's on a Lorry
A major dairy cured pop-opens in a single morning trial on their own line, and picked up a 6% consumption saving along the way.
Field Report
How a Recipe Box Packer Cut Hot Melt Energy Use by Two Thirds
Field report from a national recipe box packer: 66% less adhesive energy, 31% less glue, and blocked nozzles gone after a one-day trial.
Field Report
Charring In The Tank Is Not A Maintenance Problem
A condiments packer's tank was charring and blocking nozzles. We swapped to a cleaner running grade at the same temperatures and cut adhesive consumption by 31.8%, weighed on their own line.
Need help choosing the right Fastlock grade?
Book a 30-minute consultation with one of our adhesive specialists. We'll look at your line, your substrates and your goals.
Book a Consultation

