About UltimateCool® 98 Plus
UltimateCool® 98 Plus is a hot melt adhesive for packaging & case sealing used across food & beverage industries. It delivers application temperature: 98°C with enhanced cold resistance, optimised for frozen food cartons and cases, over 54% energy savings. Request the technical data sheet below for full performance and storage information.
Key features
- Application temperature: 98°C with enhanced cold resistance
- Optimised for frozen food cartons and cases
- Over 54% energy savings

Technical attributes
- Type
- hot melt adhesive
- Packaging
- Bag
- Typically used on
- NordsonValcoMelerHHSPreoRobatechGracoB+/SealedairSMI case and tray sealersLantechCama GroupSomic PackagingBlueprint AutomationKliklok-WoodmanJacob White PackagingBosch/SyntegonSchubert GroupKrones AGFreemantleRovema GmbHBoixSmurfit KappaOystar A&F wraparoundIMA cartonerSMIBradman Lake
Applications
Industries
Mentioned across the site
Industry pages, articles and case studies where this product is referenced.
How our hot melt grades hold case and tray sealing through cold chains, transit and seasonal temperature swings.
Food-safe hot melt and water-based adhesives engineered for high-speed beverage and food lines.
The science behind our adhesive generations — Gen 1 to Gen 7 — and why it matters on the line.
Why nozzles block, how char forms in tanks and which adhesives eliminate the problem at source.
Five practical fixes for case-seal failures when ambient temperatures climb above 30°C.
Why standard EVAs fail in summer and how UltimateCool® holds bonds through hot transit.
Practical checklist for cutting unplanned downtime caused by adhesive issues.
Deep-dive whitepaper covering chemistry, performance and ROI across all seven adhesive generations.
What manufacturers brought to stand A85 and how UK-formulated SafeMelt®, CleanPeel® 120 and BioMelt® 30151 answer those problems.

Generation 6 low-temperature adhesives running from 100°C — up to 52% energy savings versus traditional 160°C grades, with dramatically extended tank life.
Explore the UltimateCool rangeRelated products
Other UltimateCool grades and close family members.
UltimateCool® EC98
Economy Low-Temperature Adhesive
- Application temperature: 98°C
- Cost-effective solution for standard packaging
- Over 54% energy savings vs traditional adhesives
- Generation 6 technology — runs from 98°C in the tank.
UltimateCool® 100
Generation 6 low temperature adhesive
- High-performance hot melt adhesive for demanding applications
- Generation 6 technology - runs from 100°C in the tank
- Typically 52% lower in energy compared to traditional grades running at 160°C
- Fast setting for case and carton sealing applications
UltimateCool® 98
Hot melt adhesive
- High-performance hot melt adhesive for demanding applications.
- Generation 6 technology — runs from 98°C in the tank.
- Typically 54% lower in energy compared to traditional grades running at 160°C.
- Fast setting for case and carton sealing applications.
Request more information
Get the technical data sheet, safety data sheet and a sample for UltimateCool® 98 Plus. We'll get back to you within one working day.
Request Samples, MSDS & Technical Data Sheets
Select the products you're interested in and we'll send you the information you need.
People who looked at this also viewed
Fastlock® 781
Low Surface Energy Specialist
- Outstanding adhesion on BOPP, PP, PET & metallised films
- Deep-freeze performance
- Neat, non-stringing application
- Excellent adhesion on BOPP sandwich packs.
Fastlock® 71P
General Purpose Hot Melt Stick
- Fast-setting with medium viscosity for versatile use
- Available as 12mm stick for glue gun application
- FDA approved — CFR 21.175.105
- Good general purpose packaging.
PerfectaMax® 581
Premium Metallocene Hot Melt
- Outstanding bond strength on difficult substrates
- Zero char technology
- Extended equipment life
- Superb adhesion to coated boards, grease resistant boards and deep freeze.
Alphabond Field Reports
From the field
Real trials on real production lines, measured on site.
Field Report
How a Recipe Box Packer Cut Hot Melt Energy Use by Two Thirds
Field report from a national recipe box packer: 66% less adhesive energy, 31% less glue, and blocked nozzles gone after a one-day trial.
Field Report
Nobody Asked Why The Tank Ran That Hot
A frozen chip packer's hot melt tank had run at 165 degrees C for years, no one could say why. Bringing it down 67 degrees cut adhesive use by a fifth.
Field Report
Char in the Tank Is Not Normal
Black flecks in a hot melt tank are usually a sign of running too hot for too long. Here's what happened when a fresh produce packer tried running 70 degrees cooler.
Need help choosing the right UltimateCool grade?
Book a 30-minute consultation with one of our adhesive specialists. We'll look at your line, your substrates and your goals.
Book a Consultation

