BioMelt

    BioMelt® 30151

    Recyclable Hot Melt Adhesive

    hot melt adhesive
    Bag
    Request data sheets

    About BioMelt® 30151

    BioMelt® 30151 is a hot melt adhesive designed for assembly and packaging & case sealing applications in the pocket spring & mattress sector. It contains approximately 67% polypropylene content for improved recyclability, delivers strong and flexible bonds on difficult nonwoven substrates, and features a neutral odour with a white/clear appearance. Request the technical data sheet below for full performance and storage details.

    Key features

    • ~67% polypropylene content for recyclability
    • Strong & flexible bonds on difficult nonwoven substrates
    • Neutral odour, white/clear appearance
    BioMelt 30151 packaging

    Technical attributes

    Type
    hot melt adhesive
    Packaging
    Bag
    Typically used on
    Nordson
    Valco
    Meler
    HHS
    Preo
    Robatech
    Graco
    Spuhl

    Mentioned across the site

    Industry pages, articles and case studies where this product is referenced.

    Application
    Packaging & Case Sealing

    How our hot melt grades hold case and tray sealing through cold chains, transit and seasonal temperature swings.

    Read Packaging & Case Sealing
    Application
    Personal Care

    Skin-safe construction and elastic attachment adhesives for nappies, hygiene and feminine-care products.

    Read Personal Care
    Industry
    Food & Beverage

    Food-safe hot melt and water-based adhesives engineered for high-speed beverage and food lines.

    Read Food & Beverage
    Industry
    Breweries & Distilleries

    Mould-resistant labelling and clean-peel solutions for returnable bottles and brewery wash systems.

    Read Breweries & Distilleries
    Industry
    Pocket Spring & Mattress

    Specialist BioMelt® grades for pocket-spring and mattress assembly with low odour and high green strength.

    Read Pocket Spring & Mattress
    Industry
    Personal Care & Hygiene

    Adhesive systems for nonwoven hygiene products — soft, skin-safe and engineered for line speed.

    Read Personal Care & Hygiene
    About
    How Our Technology Works

    The science behind our adhesive generations — Gen 1 to Gen 7 — and why it matters on the line.

    Read How Our Technology Works
    Article
    Evolution of Hot Melt Adhesives

    Seven generations of hot melt development — what changed, what failed and what's next.

    Read Evolution of Hot Melt Adhesives
    Whitepaper
    Whitepaper: Gen 1 to Gen 7

    Deep-dive whitepaper covering chemistry, performance and ROI across all seven adhesive generations.

    Read Whitepaper: Gen 1 to Gen 7
    Blog
    PPMA Show 2026 Wrap-Up

    What manufacturers brought to stand A85 and how UK-formulated SafeMelt®, CleanPeel® 120 and BioMelt® 30151 answer those problems.

    Read PPMA Show 2026 Wrap-Up
    Case Study
    Manor Packaging

    How Manor Packaging switched to BioMelt® and improved bond consistency on corrugated lines.

    Read Manor Packaging
    BioMelt logo
    About the BioMelt brand

    Bio-based hot melt adhesives formulated with renewable content — the same performance you expect, with a smaller carbon footprint.

    Explore the BioMelt range

    Related products

    Other BioMelt grades and close family members.

    Fastlock® 66XE product

    Fastlock® 66XE

    High Performance Bio derived Assembly Adhesive

    • Excellent adhesion to PP non-woven, corrugate, Frovi & PUR foam
    • Long open time with high hot tack
    • FDA approved — CFR 21.175.105
    • Good adhesion to difficult materials
    hot melt adhesive
    Bag
    View product page
    BioMelt-R® 30194-PP product

    BioMelt-R® 30194-PP

    Specialist Polypropylene Based Hot Melt

    • Granulated hot melt for pocket spring
    • Excellent adhesion to wide range of substrates
    • Allows for mono polymer approach for recycling when applied to PP based substrates
    • 90+% Polypropylene
    hot melt adhesive
    Bag
    View product page
    Fastlock® 781 product

    Fastlock® 781

    Low Surface Energy Specialist

    • Outstanding adhesion on BOPP, PP, PET & metallised films
    • Deep-freeze performance
    • Neat, non-stringing application
    • Excellent adhesion on BOPP sandwich packs.
    hot melt adhesive
    Box
    View product page

    Request more information

    Get the technical data sheet, safety data sheet and a sample for BioMelt® 30151. We'll get back to you within one working day.

    Request Samples, MSDS & Technical Data Sheets

    Select the products you're interested in and we'll send you the information you need.

    People who looked at this also viewed

    Fastlock® 66XE product

    Fastlock® 66XE

    High Performance Bio derived Assembly Adhesive

    • Excellent adhesion to PP non-woven, corrugate, Frovi & PUR foam
    • Long open time with high hot tack
    • FDA approved — CFR 21.175.105
    • Good adhesion to difficult materials
    hot melt adhesive
    Bag
    View product page
    Fastlock® 30081 product

    Fastlock® 30081

    Side-Glue Adhesive

    • Excellent adhesion on common stocks
    • Strong creep resistance
    • Flexible bond for durability
    • Very high grab PSA hot melt.
    hot melt adhesive
    Box
    View product page
    Fastlock® 121X product

    Fastlock® 121X

    Low odour, pressure sensitive hot melt with very high tack

    • Very high tack and medium viscosity for reliable bonding
    • Good thermal stability for high productivity environments
    • Available in Pillow Pack® or Mini Pillow Pack® for faster meltdown
    • Long open time allowing time to assembly.
    hot melt adhesive
    Box
    View product page

    Need help choosing the right BioMelt grade?

    Book a 30-minute consultation with one of our adhesive specialists. We'll look at your line, your substrates and your goals.

    Book a Consultation